Staff

سعد بهي الدين سعد الدين علي الدين

سعد بهي الدين سعد الدين علي الدين

سعد بهي الدين سعد الدين علي الدين

saad.bahey@eng.psu.edu.eg

كلية الهندسة ببورسعيد

الهندسة البحرية و عمارة السفن

استاذ دكتور

قسم الهندسة البحرية وعمارة السفن- كلية الهندسة- جامعة بورسعيد

Publications

  1. Hassan H. M., Saad-Eldeen S. 2026. Image-Based Hybrid Neural Network Model for Naval Ship Wave Resistance Prediction. J. Mar. Sci. Eng.,14(3), 309.
  2. Eltawosy S., El-Kilani H., Fathallah E. Saad-Eldeen S. 2025. Crashworthiness Analysis of Aluminum Corrugated-Core Sandwich Panels Under Impact. 10.21608/pserj.2025.396167.1418.
  3. Eltawosy S., El-Kilani H., Fathallah E. Saad-Eldeen S. 2025. Numerical Impact Assessment Based on Experiments for Steel Stiffened Panels with and Without Prior Dent. J. Mar. Sci. Eng., 13, 1263.
  4. Saad-Eldeen S, Mansour M., M-Allah Eltaramsy. 2024. Experimental Compressive Assessment of Different Stiffened Plate Welding Configurations. J. Mar. Sci. Eng., 12(12), 2238.
  5. Saad-Eldeen S, Mansour M., M-Allah Eltaramsy. 2024. Distortion Analysis of Steel Stiffened Plates Accounting for Different Welding Configurations. Port-Said Engineering Research Journal, 28(3), pp: 132:139.
  6. Saad-Eldeen S, Garbatov Y. 2023. Experimental and Numerical Analysis of Structural Capacity of Perforated Stiffened Plates. J. Mar. Sci. Eng., 11(4), pp: 842.
  7. Ashraf Attia, El-Kilani H. Mostafa M. EL-Afandy, Saad-Eldeen S. 2023. Numerical simulation of intact and cracked aluminum- alloy stiffened panels: Calibration based on experiment. Ocean Engineering 269, pp: 113474.
  8. Ashraf Attia, Saad-Eldeen S., Mostafa M. EL-Afandy, El-Kilani, H. 2022. Structural Response Analysis of Experimentally Tested Aluminum Cracked Panels under Compressive Load. Port-Said Engineering Research Journal, 26(3), pp: 74-92.
  9. Yosri A, Leheta H, Saad-Eldeen S, Zayed A. 2022. Accumulated fatigue damage assessment of side structural details in a double hull tanker based on spectral fatigue analysis approach. Ocean Engineering 251, pp:111069.
  10. Elmalaki, M., Saad-Eldeen, S., El-Kilani, H. 2022. 'Effect of geometrical properties of aluminium extrusion on post-buckling behaviour of stiffened panels in marine applications', Port-Said Engineering Research Journal, 26(1), pp. 68-83.
  11. Yosri A, Zayed A, Saad-Eldeen S, Leheta H. 2021. Influence of stress concentration on fatigue life of corroded specimens under uniaxial cyclic loading. Alexandria Engineering Journal. 60 (6), 5205-5216.
  12. Saad-Eldeen S, Garbatov Y, Guedes Soares C. 2020. Experimental failure assessment of high tensile stiffened plates with openings. Engineering Structures. 206, pp. 110121.
  13. Saad-Eldeen S, Garbatov Y, Guedes Soares C. 2019. Buckling collapse tests of deteriorated steel plates with multiple circular openings. Ocean Engineering. 172, pp. 523-530.
  14. Garbatov Y, Saad-Eldeen S, Guedes Soares C, Parunov J, Kodvanj J. 2019. Tensile test analysis of corroded cleaned aged steel specimens. Corrosion Engineering Science and Technology. 54 (2), pp. 154-162.
  15. Saad-Eldeen S, Garbatov Y, Guedes Soares C. 2018. Structural capacity of plates and stiffened panels of different materials with opening. Ocean Engineering. 167, pp. 45-54.
  16. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2017. Experimental Compressive Strength Analyses of High Tensile Steel Thin-Walled Stiffened Panels with A Large Lightening Opening. Thin-Walled Structures. 113, pp. 61–68.
  17. Garbatov Y, Parunov J, Kodvanj J, Saad-Eldeen S, Guedes Soares C. 2016. Experimental Assessment of Tensile Strength of Corroded Steel Specimens Subjected to Sandblast and Sandpaper Cleaning. Marine Structures. 49, pp. 18-30.
  18. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2016. Experimental Strength Analysis of Steel Plates with A Large Circular Opening Accounting for Corrosion Degradation and Cracks Subjected to Compressive Load Along the Short Edges. Marine Structures. 48, pp. 52-67.
  19. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2016. Fast approach for ultimate strength assessment of steel box girders subjected to non-uniform corrosion degradation. Corrosion Engineering Science and Technology. 51 (1), pp. 60-76.
  20. Saad-Eldeen S, Garbatov Y, Guedes Soares C. 2016. Experimental investigation on the residual strength of thin steel plates with a central elliptic opening and locked cracks. Ocean Engineering. 115, pp. 19–29.
  21. Saad-Eldeen S, Garbatov Y, Guedes Soares C. 2016. Experimental strength assessment of thin steel plates with a central elongated circular opening. Journal of Constructional Steel Research. 118, pp. 135–144.
  22. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2016. Ultimate strength analysis of highly damaged plates. Marine Structures. 45, pp. 63-85.
  23. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2016. Strength Assessment of Steel Plates Subjected to Compressive Load and Dent Deformation. Structure and Infrastructure Engineering. 12 (8), pp. 995-1011.
  24. Garbatov, Y., Saad-Eldeen, S., Guedes Soares, C., 2015. Hull Girder Ultimate Strength Assessment based on Experimental Results and the Dimensional Theory. Engineering Structures. 100, pp. 742–750.
  25. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Stress-strain Analysis of Dented Rectangular Plates Subjected to Uni-axial Compressive Loading. Engineering Structures. 99, pp. 78–91.
  26. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2014. Strength Assessment of a Severely Corroded Box Girder Subjected to Uniform Bending. Journal of Constructional Steel Research. 92, pp. 90–102.
  27. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2013. Effect of Corrosion Severity on the Ultimate Strength of a Steel Box Girder. Engineering Structures. 49, pp. 560–571.
  28. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2013. Experimental Assessment of Corroded Box-Girders Subjected to Uniform Bending. Ships and Offshore Structures. 8 (6), pp. 653–662.*** Taylor & Francis, Jeom Kee Paik and the Editorial Board of Ships and Offshore Structures are delighted to announce that the following paper has been awarded the 2013 Best Paper Award: Experimental assessment of corroded steel box girders subjected to uniform bending,2013, 8(6), 653-662.
  29. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2012. Ultimate Strength Assessment of Corroded Box Girders. Ocean Engineering. 58, pp.35–47.
  30. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2012. Effect of Corrosion Degradation on the Ultimate Strength of Steel Box Girders. Corrosion Engineering Science and Technology. 47, pp. 272-283.
  31. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2012. Analysis of Plate Deflections during Ultimate Strength Experiments of Corroded Box Girders. Thin-Walled Structures. 54, pp. 164-176.
  32. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2011. Compressive Strength Assessment of a Moderately Corroded Box Girder. Marine Systems & Ocean Technology. 6, pp. 27-37.
  33. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2011. Corrosion-Dependent Ultimate Strength Assessment of Aged Box Girders Based on Experimental Results. Journal of Ship Research 55, pp. 289-300.*** Has been selected as a Significant Paper, one of the best papers published in a SNAME periodical in 2011, re-published in SNAME (2012), "2011 SNAME Transactions", Vol. 119, pp. 591-602, ISBN (Hard Cover) 978-0-939773-88-6.
  34. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2011. Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to Severe Corrosion. Marine Structures 24, pp. 338-357.
  35. Hess, P. E., An. C., Brubak, L., Chen, X., Chiu, J. T., Czujko, J., Darie, I., Feng, G., Gaiotti, M., Jang, B. S., Kefal, A., Makmun, S., Ringsberg, J., Romanoff, J., Saad-Eldeen, S., Schipperen, I. Tabri, K., Wang, Y., Yanagihara, D., 2022. Committee III.1: Ultimate Strength. 21st International Ship and Offshore Structures Congress, Volume 1, Vancouver, Canada, September 2022. SNAME-ISSC-2022-COMMITTEE-III-1.
  36. Yosri, A., Zayed, A., Saad-Eldeen, S. Leheta, H., 2021. Fatigue Assessment of Aged Steel Specimens under Uniaxial Cyclic Loading, in: Abdel Wahab, M. Editor, Lecture Notes in Mechanical Engineering: Proceedings of the 8th International Conference on Fracture, Fatigue and Wear (FFW 2020 2020), August 26–27, 2020, Online conference, pp. 523-532.
  37. J. Czujko, A. Bayatfar, M. Smith, M.C. Xu, D. Wang, M. Lützen, S. Saad-Eldeen, D. Yanagihara, G.Notaro, X. Qian, J.S. Park, J. Broekhuijsen, S. Benson, S.J. Pahos, J. Boulares. 2018. Committee III. 1: Ultimate Strength. Proceedings of the 20th International Ship and Offshore Structures Congress (ISSC 2018) Volume 1. pp. 335 – 439.
  38. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2018. Failure assessment of wash plates with different degree of openings, in: Guedes Soares, C., Santos T.A. (Eds.), Progress in Maritime Technology and Engineering: Proceedings of the 4th International Conference on Maritime Technology and Engineering (MARTECH 2018), May 7-9, 2018, Lisbon, Portugal, pp. 377-385.
  39. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2018. Ultimate bending capacity of multi-bay tubular reinforced structures, in: Guedes Soares, C., Teixeira, A.P. (Eds.), Maritime Transportation and Harvesting of Sea Resources. Taylor & Francis Group, London, UK, pp. 671-678.
  40. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2017. Strength enhancement of cracked swash bulkheads of jack-up spud-can, in: Guedes Soares, C., Grabatov, Y. (Eds.), Progress in the Analysis and Design of Marine Structures. Taylor & Francis Group, London, UK, pp. 763-769.
  41. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2017. FE model calibration and validation of a tested plate with an opening under compressive load, in: Guedes Soares, C., Grabatov, Y. (Eds.), Progress in the Analysis and Design of Marine Structures. Taylor & Francis Group, London, UK, pp. 305-312.
  42. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2016. Ultimate bending moment capacity of a single hull structure with large openings in side shell, in: Guedes Soares, C., Santos T.A. (Eds.), Maritime Technology and Engineering III. Taylor & Francis Group, London, UK, pp. 531-538.
  43. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2016. Emergency repair of a single hull structure with locked cracks, in: Guedes Soares, C., Santos T.A. (Eds.), Maritime Technology and Engineering III. Taylor & Francis Group, London, UK, pp. 521-529.
  44. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Ultimate strength of box girders with large openings subjected to flexural load, in: Guedes Soares, C., Dejhalla, R. & Pavletic, D. (Eds.), Towards Green Marine Technology and Transport. Taylor & Francis Group, London, UK, pp. 335-343.
  45. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Ultimate strength of a corroded box girder subjected to pure bending and a non-propagating crack, in: Guedes Soares, C., Dejhalla, R. & Pavletic, D. (Eds.), Towards Green Marine Technology and Transport. Taylor & Francis Group, London, UK, pp. 373-380.
  46. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Residual strength of a severely damaged box-girder subjected to combined action of non-uniform and inter-crystalline corrosion, in: Guedes Soares, C. & Shenoi A. (Eds.), Analysis and design of Marine Structures. Taylor & Francis Group, London, UK, pp. 521-531.
  47. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Structural capacity of an aging box girder accounting for the presence of a dent, in: Guedes Soares, C. & Shenoi A. (Eds.), Analysis and design of Marine Structures. Taylor & Francis Group, London, UK, pp. 403-414.
  48. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Strength assessment of wash plates subjected to combined lateral and axial loading, in: Guedes Soares, C. & Santos T.A. (Eds.), Maritime Technology and Engineering.  Taylor & Francis Group, London, UK, pp. 553-564.
  49. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2015. Compressive strength assessment of steel rectangular plates accounting for the presence of a local dent or an opening, in: Guedes Soares, C. & Santos T.A. (Eds.), Maritime Technology and Engineering.  Taylor & Francis Group, London, UK, pp. 543-552.
  50. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2014. Ultimate strength assessment of steel plates with a large opening, in: Guedes Soares, C., López Peña (Eds.), Developments in Maritime Transportation and Exploitation of Sea Resources. Taylor & Francis Group, London, UK, pp. 373-380.
  51. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2012. Influence of Weld Toe Shape and Material models on the Ultimate Strength of a Slightly Corroded Box Girder, in: Rizzuto, E., Guedes Soares, C. (Eds.), Sustainable Maritime Transportation and Exploitation of Sea Resources. Taylor & Francis Group, London, UK, pp. 401-409.
  52. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2012. FE Parameters Estimation and Analysis of Ultimate Strength of Box Girder, in: Guedes Soares, C., Garbatov, Y., Sutulo, S., Santos, T. A. R (Eds.), Maritime Technology and Engineering. Taylor & Francis Group, London, UK.
  53. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2011. Failures Mode Analysis of Corroded Steel Structures Subjected to Compressive Load in: Guedes Soares, C., Fricke, W. (Eds.), Advances in Marine Structures. Taylor & Francis Group, London, UK, pp. 503-510.
  54. Saad-Eldeen, S., Guedes Soares, C., 2009. Effect of Pitting Corrosion on The Collapse Strength of Rectangular Plates Under Axial Compression, in: Guedes Soares, C., Das, P.K. (Eds.), Analysis and Design of Marine Structures. Taylor & Francis Group, London, UK, pp. 231-236.1.
  55. Leheta, H., Abd El-Ghany, R., Amin, A., Saad-Eldeen, S., 2007. Cathodic Protection design procedure for steel offshore structures, in: Kolev, P., Guedes Soares, C. (Eds.), Maritime Industry, Ocean Engineering and Coastal Resources. Taylor & Francis Group, London, UK, pp. 211-217.
  56. Ashraf Attia, Heba S. El-Kilani, Saad-Eldeen, S., 2021, Ultimate Strength Behaviour of Cracked Ship Panels: A Review, Proceedings of the ASME 40th International Conference on Offshore Mechanics and Arctic Engineering, Virtual Conference, OMAE2021-63772.
  57. Saad-Eldeen, S., Mahmoud Helal, Elsayed Fathallah, 2021, Structural Strength Assessment of Dented Steel Tubular Members, Proceedings of the ASME 40th International Conference on Offshore Mechanics and Arctic Engineering, Virtual Conference, OMAE2021-63897.
  58. Saad-Eldeen, S., Nguyen, K., Garbatov, Y., Guedes Soares, C., 2010, Fatigue Stress Assessment Accounting for Contact Effect, Proceedings of the 10th International Conference on Marine Science and Technology, Black Sea 2010 Varna, Bulgaria.
  59. Saad-Eldeen, S., Garbatov, Y., Guedes Soares, C., 2010, Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to four-point Bending Moment, Proceedings of the 11th International Symposium on Practical Design of Ships and other Floating Structures (PRADS2010), Rio de Janeiro, Brasil, pp. 1134:1143.
  60. Abdel-Ghany, R., Saad-Eldeen, S., Leheta, H., 2008, The Effect of Pitting Corrosion on the Strength Capacity of Steel Offshore Structures, Proceedings of the ASME 27th International Conference on Offshore Mechanics and Arctic Engineering, Estoril, Portugal, ASME, OMAE2008-57844.
شارك صفحتك الشخصية